LEDMetal Channel / 表面発光面押え式 112LED Metal ChannelFace Lit (Trim Cap Face)SpecificationNoteThickness=depending on the kinds of LED.OutdoorUseAvailableDimmerLight SourceLED Module / LED Custom UnitMaterial Acrylic / Stainless Steel with trim cap or Steel with trim cap *Steel is indoor use only.SizeRecommended: 300-1000mmAvailable: 200-1500mmLED Module: 70mm〜 | LED Custom Unit: 40mm〜ThicknessMinimum Stroke WidthLED Module: 20mm〜 | LED Custom Unit: 15mm〜Minimum Stroke Widthof trim cap*The drain hole with 8mm dia. is needed at the bottom of signage in the case of being installed outdoor locations.*The designated AC/DC power supply to be used. Please refer to P.129 for details.*Minimum letter height, minimum letter thickness and minimum stroke width vary depending on the light source. For details, please refer to our sales representatives.*This product can be manufactured in accordance with “UL standard” or “CE mark” upon request. Please contact us for details about standards such as UL, CE, CCC and KC.*For warranty information, see P.270-271 “Warranty Policy”*Film and inkjet parts are not covered under the warranty.*Product specification and appearance may be subject to change without notice due to product improvement.*Some letters cannot be manufactured depending on the font type. Please send us your logo artwork in Adobe Illustrator format, and we will provide an accurate quotation.Surface: Opal Acrylic Body: Stainless Steel Channel Brushed FinishLight Source: LED Module Natural White5mm〜 *Trim Cap Width is attached from the basic logo to the outside.*For LED colors, please refer to P.107.Stainless Steel or SteelChannelThicknessTrim CapAcrylicPower CableScan the QR code for Website.WebカタログはQRコードを読み取ってください。LEDLED Metal ChannelLEDメタルチャンネル
元のページ ../index.html#112