ENTERTANMENTマッピングサインSIGNI***▼▼▼▼▼▼▼▼▼Use the dedicated editing software to write the playback order of the contents and schedule settings to the STB.There are two methods available, the simple “stand-alone method” and the convenient “local network method”.Maintenance methods and costs for projectors vary depending on the type of internal light source. The condition of consumption of the projector and its parts varies depending on the continuous projection time (*1) and power management method. Please refer to the following information for reference only.If the light source is laserIt has a long life span of approximately 20,000 hours. Assuming projection of 8 hours a day, it can be used for 7 years. Due to the nature of the light source, replacement is not available.RepairmethodRemove the main body of the projector and send it to the manufacturer for repair, or replace the entire projector.The warranty period and terms of projectors, STBs, and other related equipment are in accordance with the policy of the respective manufacturers.Warranty for signage is in accordance with the warranty policy of the respective products. Please contact us for details.Stand-alone MethodLocal Network MethodFor bright and sharp images:Please keep the brightness of the environment at around 100~200lx (slightly dimmed luminance). For example, the brightness of the sunset on a sunny day or the brightness of a hotel lobby.For the installation (projected) surface of the sign:To have sharp images, the wall should be even and smooth. Matte white finish is highly preferable.If the projected surface is glass, please take appropriate precautions of the reflection and brightness of the projector light.Reinforcement of the installation location:The total weight of the projector and mounter may exceed 10kg. Please reinforce the installation location to support the weight if necessary.Edit with the dedicated softwareWindows PCPlease prepare a computer with Windows OS separately.Edit with the dedicated softwareWindows PCPlease prepare a computer with Windows OS separately.*1Continuous use for a long time may accelerate the wear and tear of optical components.*2If lamp replacement is to be done at a high place, please take sufficient safety precautions.Manual updateand replacementMicro SD CardLocal Area NetworkUpdate remotelyfrom your deskAn “IP address” must be assigned to the STB itself.HDMI CableSTBHDMI CableSTBProjectorProjector147How to Manage Your STBEnvironmental RequirementsMaintenance of the ProjectorAbout WarrantyIf the light source is lampThe built-in lamp is a consumable item.Approximate life span (50% brightness) is 3,000-5,000 hours.Assuming projection of 8 hours a day, it can be used for 375-625 days.RepairmethodThe warranty for the product casing and other processing is one year. It is possible to operate in locations where there is no network. It is also suitable when the number of managed units and the frequency of updates are less. The Micro SD card needs to be replaced manually for every update but this is a configuration with the lowest cost.Contents and schedule update can be done remotely which is suitable for frequent content updates or for managing STBs stored in hard-to-reach location. LAN network environment is required.For power supply equipment and maintenance:The projector and STB are driven at AC100-240V power supply. Please provide sockets nearby and prepare access panel for easy maintenance.Communication equipment:If you wish to connect the STB to a local network, please provide LAN port nearby. In addition, an “IP address” must be assigned to the STB. Please check with your system administrator.Adjustment and installation on site:Please contact us for details about installation of signage and equipment.Replacement lamp can be purchased and replaced by customers themselves. (*2)Windows PCWindows PCLAN
元のページ ../index.html#147