TAFFLITESIGNカッティングバリエーション【Minimum Stroke】177Semi-Straight Cut ( 6°, 8° )Bevel Cut ( 15°, 30°, 45° )R-Direct CutType: Taff Lite 5mm Thick / Semi-Straight CutFinish: Scuffed NickelType: Taff Lite 5mm Thick / 30° Bevel CutFinish: Gold BronzeType: Taff Lite 5mm Thick / R-Direct CutFinish: Black Nickel*Standard Bevel Angle of Semi-Straight is 8°. Please specify if you need a 6° angle.*For some plating variations, sides of the letters are to be painted in a similar color to the fece finish. Please refer to TAFF LITE SIGN Color Variation at P.176.*Custom paint on sides is applicable at your request.*Dimensions of the letter bottom vary depending on the thickness and bevel angle of the letter. Please contact us for further information.*Some letters may not be manufactured due to the size or font. Please contact us for further information.*Dimensions of the letter bottom vary depending on the thickness and bevel angle of the letter. Please contact us for further information.*For some plating variations, sides of the letters are to be painted in a similar color to the surface finish. Please refer to TAFF LITE SIGN Color Variation at P.176.*Custom paint on sides is applicable at your request.*Some letters may not be manufactured due to the size or font. Please contact us for further information.*Dimensions of the letter bottom to be the same as the provided artwork. Please contact us for further information.*For some plating variations, sides of the letters are to be painted in a similar color to the surface finish. Please refer to TAFF LITE SIGN Color Variation at P.176.*Some letters may not be manufactured due to the size or font. Please contact us for further information.The Semi-Straight Cut, a nearly right angled bevel cut of 6°or 8°, is our standard cutting style, and enables us to manufacture signs containing small-sized logos and fonts which cannot be made in metal.Beveled finish gives volume and presence to your signs. For design containing very small or intricate parts, Bevel Cut provides lower cost and easier installation by connecting them into one piece.Softly rounded edge of R-Direct Cut makes it especially suitable for sans-serif typeface such as Helvetica. By adjusting the stroke width and thickness, it is possible to create a solid shaped sign similar to Arched Top at a reasonable price.Thickness 6°, 8°Thickness: 2 , 3 , 5 , 8 , 10 , 15 , 20 , 30mmThickness15°, 30°, 45°Thickness: 2 , 3 , 5 , 8 , 10 , 15 , 20mm2t : 3.8mm3t : 5.0mm5t : 8.3mm8t : 16mm10t : 20mm15t : 30mm20t : 40mmThickness: 2 , 3 , 5 , 8 , 10 , 15 , 20mmThickness (t)Minimum StrokeTAFF LITE SIGNCutting Variation
元のページ ../index.html#177