enL mottoBNON-LITLETTERSIGNSeriesタフライトサイン・Dレター・クリスタルレターi235831111111 カット方法の注意点Chamfered + Semi-Straight Cut reference.Round + Semi-Straight Cut reference.225 Minimum Stroke for R-Direct Cutting StyleNotes for Chamfered + Semi-Straight CutNotes for R-Direct Cutting StyleProvided Artwork8mm / R-Direct Cut10mm / R-Direct CutNotes for Round +Semi-Straight CutExample. Cut 10mm Thick with 5mm/ Round CutThe outline Edge of the provided artwork becomes the shoulder line of the actual letter. You can choose the Radius of the Round Edge from the table below. Please note that the Radius you choose will limit the available stroke.Actual Letter15mm / R-Direct Cut*The dimensions and font style impose limits on what can be made.Minimum Stroke ofEdge of the provided artworkSection20mm / R-Direct Cut2mm / R-Direct Cut3mm / R-Direct CutMin. StrokeMin. Stroke 3.8mmMin. Stroke 5mmBevel Bit(45°)10tSemi-Straight CutThe outline edge of the provided artwork becomes the bottom line of the actual letter. So when compared with the Bevel Cutting Style, R-Direct seems more narrow. Therefore, we recommend that you make the artwork a little bit wider than normal. The minimum stroke of the letter depends on the material thickness . Please refer to the table below, and adjust your artwork accordingly.Example. Cut 10mm Thick with 45°The outline edge of the provided artwork becomes the shoulder of the actual letter. You can choose the Bevel size from the table below. Please note that the Bevel size you choose will limit the available stroke of the letter.3mm6mm8mm5mm / R-Direct CutH30Minimum Stroke of1Edge of the provided artworkMin. Stroke 8.3mm*Please send us data with the shoulder1 line as the outline of the digital drawing.1C2C3C4C10mmMin. Stroke 16mmRound Edge Bit5C12mmSemi-Straight Cut3mm5mmBottom Line10Min. Stroke 20mmMin. Stroke 30mm*Please send us data with the shoulder1 line as the outline of the digital drawing.5R1R2R10t8R10R18mm22mm8mmThicknessRoundEdge1520Min. Stroke 40mm3R5R12mm12R15R26mm32mm
元のページ ../index.html#225